windows 10 advanced display settings missing

If the value of BIOS Mode is UEFI, then your computer is equipped with UEFI.

Then, move over to the right pane and scroll down through the items to find BIOS Mode.

Inside the System Information window, select System Summary from the left-hand side pane.

Then, type “msinfo32” and press Enter to open up the System Information screen.

Press Windows key + R to open up a Run dialog box.

To determine if this is true or not, you can run the MSINFO utility to find out the BIOS Mode inside the System Information screen. If you’re dealing with an older computer (with an older motherboard), chances are UEFI firmware is unavailable and the only supported BIOS Mode is Legacy. Method 1: Verifying if the computer is equipped with UEFIīefore you follow other repair strategies, it’s important to be 100% sure that your computer has the necessary UEFI firmware to open the settings menu. As long as UEFI is supported on your system, one of the methods below is bound to resolve the issue regardless of the scenario you’re in. Down below, you’ll find a collection of methods that other users in a similar situation have used to resolve the problem.įor the best results, we advise you to follow the methods below in the order that they are presented in since they are ordered by efficiency and severity. If you’re currently struggling to resolve this particular issue on Windows 10, this article will provide you with several troubleshooting steps.

If this scenario is applicable, you can either use a MBR to GPT converter or install your OS again with UEFI enabled.

Windows 10 Was installed in Legacy Mode – Even if your motherboard is equipped with UEFI capabilities, your OS won’t use it if your drive is formatted with MBR instead of GPT.

In this case, you can reset the setting by clearing the CMOS battery. This setting is only available with a limited number of UEFI-based motherboards, but keeping this option enabled will disable keystrokes during the boot sequence, which makes it way harder to access the UEFI firmware settings.

Extra Fast Startup is enabled – An even more aggressive function that will restrict access to the UEFI menu is the Extra Fast Startup sequence.

If this scenario is applicable, you can get around this issue by either bypassing the fast startup function or by disabling it altogether.

Fast startup function is disabling access to the UEFI menu – Fast Startup has the potential of preventing the end user from accessing the UEFI menu for the sake of shaving off an extra few seconds off the booting up time.

To make sure that your computer supports UEFI, you can use the MSINFO utility. Older computers only know how to boot into BIOS (Legacy Mode).

Computer’s motherboard doesn’t support UEFI – Before using any of the other potential fixes, it’s important to ensure that your motherboard is equipped to support UEFI.

Windows 10 advanced display settings missing